Per Matteo 74.
Ti riporto i valori della pressione olio motore del RZR.
Il testo e tratto dal manuale di officina .
Buon lavoro. ''NULLA VIA INVIA ''
GENERAL ENGINE SERVICE
Engine Lubrication Specifications
Accessible Engine Components
The following components can be serviced or removed with the
engine installed:
• Starter Motor / Drive
• Cylinder Head
• Cylinder
• Piston / Rings
• Rocker Arms
• Water Pump
The following components require engine removal for service:
• Flywheel
• Alternator (Stator)
• Counterbalance Shaft or Bearings
• Gear Train Components
• Camshaft
• Oil Pump / Oil Pump Drive Gear
• Connecting Rod
• Crankshaft
• Crankshaft Main Bearings
• Crankcase
Oil Pressure Test
1. Remove blind plug/sender from left side of crankcase.
2. Insert a 1/8 NPT oil pressure gauge adaptor into the
crankcase and attach the gauge.
3. Start engine and allow it to reach operating temperature,
monitoring gauge indicator.
WARNING
Be sure to install the pressure cap before
shutting off the engine.
Coolant may spit out of the radiator.
=
Capacity: Approximately 2 U.S. Quarts (1.9 L)
Oil Type: Polaris PS-4 PLUS Synthetic
Filter Wrench: PU-50105 - 2.5” (64 mm)
- Oil Pressure Specification -
27-35 psi @ 6000 RPM, Polaris PS-4 PLUS
Synthetic, Engine at operating temperature.
Oil Pressure at Idle: 6 psi
Oil Pressure at 6000 RPM (Engine Hot):
Minimum: 27 psi
Standard: 31 psi
Maximum: 35 psi